日本公司的环境报告

日本是亚洲太平洋地区进行法人报告的首创者.本文回顾了过去的十年中日本环境报告举措的发展.也描述了对日本公司进行的环境报告的调查反应.在日本正在开始注重确保环境报告可靠性的方法.环境上先进公司的环境报告正在朝可持续发展性报告的方向转移.     

Characteristics of slag, fly ash and deposited particles during melting of dewatered sewage sludge in a pilot plant

This study examines slag, fly ash, and deposited particles during melting of dewatered sewage sludge in a pilot plant. In addition, the chemical composition of particles in flue gas was simulated using a thermodynamics program, namely FACTSage 5.2. The results showed that the main components of slag were Al, Fe, Ca, P and Si; the minor components were Na, K, Mg, Cu, and Zn. The main chemical compound of slag was Ca4(Mg,Fe)5(PO4)6. For fly ash particles, heavy metals with the highest concentrations were in the order of Zn and As, Pb, Cu, and Cd, respectively. For non-heavy metals, Al, Fe and P were also found in significant amounts. The majority of deposited particles were composed of elements of Zn, P, S, Na, Fe, Al, Si, and Ca and such chemical compounds as Zn3(PO4)2, AlPO4, FePO4 and Fe(OH)3 while the minority consisted of elements of As, Cu, and Pb. Moreover, the compositions of deposited particles in each chamber differed due to different flue gas temperatures inside. In the secondary chamber at 760 degrees C, the amounts of Fe and Al were higher than Zn, whereas, in the other chambers (600-400 degrees C), the amount of Zn was higher. In other words, at the lower temperature the deposition of Zn was higher than the deposition of Fe and Al. In the water cooling section, volatile elements (i.e. Zn, As, Cu, Pb) were found in the highest concentrations due to a big difference in temperature between the wall surface and flue gas. From the simulation results, most of the elements in the gas phase were found to be chloride compounds, whereas those in the solid phase were in the form of oxide, sulfate, and phosphate compounds.     

Formaldehyde Exposure in a Gross Anatomy Laboratory. Personal Exposure Level Is Higher Than Indoor Concentration (5 pp)

Goal, Scope and Background Cadavers for gross anatomy laboratories are usually prepared by using embalming fluid which contains formaldehyde (FA) as a principal component. During the process of dissection, FA vapors are emitted from the cadavers, resulting in the exposure of medical students and their instructors to elevated levels of FA in the laboratory. The American Conference of Governmental Industrial Hygienists (ACGIH) has set a ceiling limit for FA at 0.3 ppm. In Japan, the Ministry of Health, Labour and Welfare has set an air quality guideline defining two limit values for environmental exposure to FA: 0.08 ppm as an average for general workplaces and 0.25 ppm for specific workplaces such as an FA factory. Although there are many reports on indoor FA concentrations in gross anatomy laboratories, only a few reports have described personal FA exposure levels. The purpose of the present study was to clarify personal exposure levels as well as indoor FA concentrations in our laboratory in order to investigate the relationship between them. Methods The gross anatomy laboratory was evaluated in the 4th, 10th and 18th sessions of 20 laboratory sessions in total over a period of 10 weeks. Air samples were collected using a diffusive sampling device for organic carbonyl compounds. Area samples were taken in the center and four corners of the laboratory during the entire time of each session (4-6 hours). Personal samples were collected from instructors and students using a sampling device pinned on each person's lapel, and they were 1.1 to 6 hours in duration. Analysis was carried out using high performance liquid chromatography. Results and Discussion Room averages of FA concentrations were 0.45, 0.38 and 0.68 ppm for the 4th, 10th and 18th sessions, respectively, ranging from 0.23 to 1.03 ppm. These levels were comparable to or relatively lower than the levels reported previously, but were still higher than the guideline limit for specific workplaces in Japan and the ACGIH ceiling limit. The indoor FA concentrations varied depending on the contents of laboratory sessions and seemed to increase when body cavity or deep structures were being dissected. In all sessions but the 4th, FA levels at the center of the room were higher than those in the corners. This might be related to the arrangement of air supply diffusers and return grills. However, it cannot be ruled out that FA levels in the corners were lowered by leakage of FA through the doors and windows. Average personal exposure levels were 0.80, 0.45 and 0.51 ppm for instructors and 1.02, 1.08 and 0.89 ppm for students for the 4th, 10th and 18th session, respectively. The exposure levels of students were significantly higher than the mean indoor FA concentrations in the 4th and 10th sessions, and the same tendency was also observed in the 18th session. The personal exposure level of instructors was also significantly higher than the indoor FA level in the 4th session, while they were almost the same in the 10th and 18th sessions. Differences in behavior during the sessions might reflect the differential personal exposure levels between students and instructors. Conclusion The present study revealed that, if a person is close to the cadavers during the gross anatomy laboratory, his/her personal exposure level is possibly 2 to 3-fold higher than the mean indoor FA concentration. This should be considered in the risk assessment of FA in gross anatomy laboratories. Recommendation and Outlook If the risk of FA in gross anatomy laboratories is assessed based on the indoor FA levels, the possibility that personal exposure levels are 2 to 3-fold higher than the mean indoor FA level should be taken into account. Otherwise, the risk should be assessed based on the personal exposure levels. However, it is hard to measure everyone's exposure level. Therefore, further studies are necessary to develop a method of personal exposure assessment from the indoor FA concentration.     

Questionnaire and onsite survey on municipal solid waste composting in Sri Lanka

This study was conducted to evaluate the composting processes in Sri Lanka and to identify essential improvements. The study consisted of a questionnaire survey, field observations, and interviews. The main shortcomings identified by this study were: no source separation at origin, and no monitoring for temperature, moisture, stability, or maturity during processes of composting. These problems hinder the smooth operation of the composting processes and lead to low demand for compost. Based on the findings, the recommendations for increasing the demand for compost are performing source separation during waste collections, improvement of processes by monitoring the temperature and moisture, and marketing compost so as to improve the popularity of the compost among farmers.     

Comparison of energy recovery system from municipal solid waste in terms of energy balance and life cycle CO2 emission

Journal of Material Cycles and Waste Management - We evaluated four systems for recovering energy from municipal solid waste in terms of life cycle energy and CO2 emissions. Two of these were a...     

Dry scrubbing of municipal solid waste incineration flue gas using porous sodium carbonate produced via vacuum thermal treatment of sodium bicarbonate

Journal of Material Cycles and Waste Management - Sodium bicarbonate is among the alkali chemicals used for dry scrubbing in incineration flue gas treatment. It is generally pulverized into fine...     

Reduction behaviors of permanganate by microbial cells and concomitant accumulation of divalent cations of Mg2+, Zn2+, and Co2+

Permanganate treatment is widely used for disinfection of bacteria in surface-contaminated water. In this paper, the fate of the dissolved permanganate in aqueous solution after contact with cells of Pseudomonas fluorescens was studied. Concomitant accumulation of divalent cations of Mg~(2+), Zn~(2+), and Co~(2+) during precipitation of Mn oxides was also studied. The time course of the Mn concentration in solution showed an abrupt decrease after contact of Mn(VII) with microbial cells, followed by an increase after ～ 24 hr.XRD analysis of the precipitated Mn oxides, called biomass Mn oxides, showed the formation of low-crystalline birnessite. Visible spectroscopy and X-ray absorption near edge structure(XANES) analyses indicated that dissolved Mn(VII) was reduced to form biomass Mn oxides involving Mn(IV) and Mn(III), followed by reduction to soluble Mn(II).The numbers of electron transferred from microbial cells to permanganate and to biomass Mn oxides for 24 hr after the contact indicated that the numbers of electron transfer from microbial cell was approximately 50 times higher to dissolved permanganate than to the biomass Mn oxides in present experimental conditions. The 24 hr accumulation of divalent cations during formation of biomass Mn oxides was in the order of Co~(2+) Zn~(2+) Mg~(2+).XANES analysis of Co showed that oxidation of Co~(2+) to Co~(3+) resulted in higher accumulation of Co than Zn and Mg. Thus, treatment of surface water by KMnO_4 solution is effective not only for disinfection of microorganisms, but also for the elimination of metal cations from surface water.     

Recent survey and effects of cooking processes on levels of PCDDs,PCDFs and Co-PCBs in leafy vegetables in Japan

We report here the latest levels of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and coplanar polychlorinated biphenyls (Co-PCBs) in leafy vegetables in Japan as well as the effect of cooking processes on the reduction of these contaminants. Three kinds of leafy vegetables (“komatsuna”, lettuce and spinach) from seven districts in Japan in 1998 were analyzed for the 2,3,7,8-chlorine substituted PCDD/Fs and three non-ortho-PCBs (#77, 126 and 169). The mean total TEQ levels (using the WHO-TEFs) in the komatsuna, lettuce and spinach were 0.094, 0.025 and 0.196 pg/g fresh weight, respectively. The TEQ levels are dominated by 2,3,7,8-TCDD, 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and 3,3^′,4,4^′,5-PeCB in many of the samples. For one of these isomers, the 2,3,4,7,8-PeCDF TEQ levels showed good correlation with the total TEQ levels in the samples (r=0.957). This suggests that 2,3,4,7,8-PeCDF may be an indicator for dioxin contamination in the analysis of the leafy vegetables. Also, the effects of two cooking processes (washing and washing followed by boiling) on the dioxin levels in two types of spinach samples were investigated. On average, in both samples, the total concentrations of the PCDDs, PCDFs and Co-PCB were reduced to about 38%, 73% and 88% of the initial concentrations by washing, and to 21%, 35% and 61% of the initial concentrations by washing followed by boiling. The total TEQ levels were reduced to about 30% of the initial TEQ levels by washing followed by boiling. Significant reductions in the TEQ levels were observed in the cooked samples. Thus, the cooking processes may reduce the risk of dioxin intake from the leafy vegetables.     

Batch separation of shredded bulky waste by gas-solid fluidized bed at laboratory scale

A gas-solid fluidized bed separator using various bed materials was used to separate shredded municipal bulky waste (SBW). Using 290 microm glass beads as the bed material, the apparent density of the fluidized bed was 1.5 g/cm(3) and the SBW could be separated into combustibles such as wood, paper and plastics and incombustibles such as metals and glass. The overall efficiency (Newton's efficiency) of the separation was calculated to be 0.93. In order to obtain high efficiency, the superficial velocity must be adjusted so that the fluidized bed is agitated moderately and at the same time there is no weak fluidized region. Using a mixture of particles of nylon shot and 68 microm glass beads, the apparent density of the fluidized mixture bed could be varied between 0.63 and 0.99 g/cm(3) by changing the mixing ratio of the two materials. In the case of a mixing ratio of 20% for glass beads, an apparent density of 0.65 g/cm(3) was produced, in which wood and paper components were recovered while plastics remained in the bed to give a final overall efficiency of 0.88.     

Oxygen intrusion into waste in old landfills of low organic content.

Oxygen invasion into old landfills was studied by assuming the installation of gas venting pipes to promote stabilization of waste. In an experiment using a column pack with old incombustible waste, oxygen intrusion was observed and the oxygen consumption rate was estimated. Oxygen diffused into the waste layer very quickly in the initial stage of the experiment, but oxygen concentration increased only gradually due to reduced gradient and decreasing oxygen consumption. The maximum oxygen consumption rate in packed waste was one-third of that in loosely deposited waste in a beaker measured in a respiration test. A mathematical model was created which fitted the experimental data well and a three-dimensional simulation of a full-scale landfill and a sensitivity analysis were performed.